Kayak Lift-125 lbs Max

Download Instructions Below:

Page 1

Page 2

What Comes in the Package

• 2 Nylon Straps
• 2 Lift Assemblies
• 2 Hook Pulleys
• 2 Wood Screws
• 1 Rope

What You Need

• Phillips Screwdriver
• Tape Measure

How to Put it Together

1. Measure the distance betweeen the center of the kayak and the side. The hooks on the kayak lift will attach to these.
2. After finding your ceiling joist, transfer the measurement beteween the two pulleys along the joist.
3. Tie a double-knot on the end of the rope. Thread the other end of the rope through the square hole on the lift assembly. Feed the rope throug the lift assembly pulleys and hooks.
4. Mount both of the lift assemblies with the wood screws along the joist. Be sure that the hooks line up with the nylon straps around the kayak lift.
5. Mount the rope cleat to the wall along a stud with the remaining two wood screws. If you do not mount the rope cleat in to a stud beam you need to use heavy-duty wall anchors. Wall anchors are not included with this kit but can be purchased at any home improvement store. DO NOT cut the excess rope! Wrap this rope around the cleat you mounted to the wall.

* To Lower The Lift*

Pull the rope back towards the pulley while maintaining tension on the rope. Slowly let out the rope as you lower the kayak. If you let the rope out too
quickly the rope lock will be engaged to prevent dropping it.When kayak is down, remove it from the hooks. Raise the hooks back up to the ceiling
and wrap the rope around the cleat.

Warranty and Return Information

 This item can be returned for exchange or refund within 30 days of initial receipt.  If you have any questions about this product, or any other product, please visit our Forums